TM 1-1510-225-CL
N-5
*FIRST ENGINE START (GPU START)
1. BATT switch – ON.
2. GPU – Connect.
3. EXTERNAL POWER advisory light – ON.
4. Exterior LIGHTS switches – As required.
5. Propeller area – Clear.
6. Engine – Start.
7. Engine and systems instruments – Check.
8. CONDITION lever – HIGH IDLE.
9. GPU – Disconnect.
10. GEN switch (after GPU disconnected) – RESET,
then ON.
11. BATTERY CHG annunciator – Monitor.
*SECOND ENGINE START (GPU START)
1. Propeller area – Clear.
2. Engine – Start.
3. Engine and systems instruments – Check.
4. Right PROP lever – FEATHER.
5. GPU – Disconnect.
6. Right PROP lever – HIGH RPM.
7. INVERTER switch – ON, check INVERTER light
OFF.
8. GEN switches – RESET, then ON.
9. CONDITION levers – As required.
10. RED ANTICOLLISION light – Reset.
