TM 1-1510-225-10
3B-103
Figure 3B-65. User-Defined Holding Pattern Definition
Table 3B-49. User-Defined Holding Pattern Definition
NO.
DESCRIPTION/FUNCTION
1
Accesses the Edit page.
2
To select to the Hold page.
3
Enters the desired Indicated Airspeed (in knots) for the holding pattern.
4
Enters the Expect Further Clearance (EFC) time.
5
Executes the holding pattern at the present position.
6
Inserts the holding pattern into the flight plan or removes it.
7
Inserts the length of pattern’s inbound leg. Defaults to 4 nm. If computer (not entered), it
remains dashed until the hold pattern is active.
8
Enters the duration of the inbound leg (in minutes).
9
Selects between right and left turns in the pattern. Defaults to right turn.
10
Enters the course inbound to the holding fix (in degrees).
