TM 1-1510-225-10 3A-98 NOTE With TRIP PLAN A selected, the TRIP PLAN leg  will  automatically  advance  to  display DIRECT  TO the current navigation page to waypoint  each  time  the  Trip  Plan  page  is accessed. 8.   ENTER key – Press. 9.   Groundspeed – Verify. Current aircraft groundspeed is displayed unless a manual entry is made.  Enter manual groundspeed as follows: a.     Line select key – Press to position cursor over GS field. b.     Groundspeed – Insert. c. ENTER  key   –  Press.    MAN  will appear adjacent to the GS field. To return to automatic groundspeed: d.     Line select key – Press to position   cursor over GS field. e.     BACK    key    –    Press.        AUTO? appears  in  the  GS  field  to  inform pilot  of  the  pending  change  and current   GS   is   displayed   in   the cursor. f. ENTER key - Press. 10.   Data   –   Check.      When   DIRECT   is displayed,    all    data    except    DTK    is updated  continuously.    If  data  is  not continuously updated, it will be recalculated each time: a.     The Trip Plan page is selected. b.     A TRIP PLAN is entered. c. A leg change is made on the Trip Plan page.  ETE and FPL time are recalculated whenever the groundspeed changes. d.     Leg or GS change is made on the Fuel Plan page. NOTE ETA@   the   destination   is   displayed   only when DIRECT legs are being viewed. NOTE If  the  Trip  Plan  page  is  being  displayed during  a  leg  change  (on  the  Active  Flight Plan  page),  the  new  TO  waypoint  is  not displayed.  Exit and return to the Trip Plan page to view the updated TO waypoint. Information between any desired waypoints   can   be   reviewed   by   selecting the  Trip  Plan  page  and  entering  a  FROM and  TO  waypoint,  accomplishing  manual leg    change,    or    performing    the    present position    direct    procedures.        If    the    TO waypoint is not on the selected flight plan, the flight plan number and origin/ destination fields will display dashes.  11.   Remainder  of  flight  plan.    Review  by positioning  cursor  over  TO  field  and pressing  ENTER  key  twice  to  call  up next leg.  Press  ENTER key once for each  subsequent  leg.    Groundspeed should be updated if necessary. (a)   Updating   TRIP   PLAN   Leg   To   The Current    TO    Waypoint    With    An    Active    Flight    Plan Selected. 1.   Line select key – Press to position cursor over TRIP PLAN field. 2.   Enter  the  letter  A  in  the  cursor field. 3.   ENTER    key    –    Press    twice    to display    information    in    the    data fields. NOTE If an offset waypoint is in the TO field, the OFFSET    WPT    will    appear.        Press    the ENTER key again. The  TRIP  PLAN  leg  will  display  DIRECT  TO  the current navigation page TO waypoint. Selecting another display page, other than MSG and Fuel Plan, and returning to the Trip Plan page will also   update   the   leg   with   DIRECT   TO   the   current navigation page TO waypoint. (3)   Flight Plan Fuel Planning.  The Fuel Plan page provides the capability to calculate fuel consumption   information   for   active   or   stored   flight plans,    DIRECT    TO    legs,    or    random    legs    without affecting any of the system's navigation functions.