TM 1-1510-224-MTF
PROCEDURE
TROUBLES HOOTING
REFERENCE
(s)
#2 ENG START switch - OFF.
(t)
#2 AUTO IGNITION switch - Off.
7.
Fuel panel switches - Check.
(a)
STANDBY PUMP switches (2) - OFF.
(b)
AUX XFER switches (2) - AUTO.
(c)
CROSSFEED switch - OFF.
NOTE
Refer to operator’s manual or aircraft placarding to
determine conditions affecting standby compass
headings.
*8.
Magnetic compass - Check for fluid, heading,
and current correction card.
CAUTION
Do not move POWER levers below the flight idle gate
with the engines not operating. Movement of the
POWER levers below the flight idle gate with the
engines not operating may result in bending and
damage to control linkage.
9.
Pedestal controls - Set.
(a)
POWER levers - IDLE.
(b)
PROP levers - FEATHER.
(c)
CONDITION levers - FUEL CUTOFF.
(d)
Flaps - As required.
10.
Pedestal extension switches - Set.
2-31
