TM 1-1510-224-10 Table 3-5.  Digital Flight Control System Limits (Sheet 1 of 3) Mode Control or Sensor Parameter Value Yaw Damper Yaw Engage Engage Limit Up to 45^o left or right bank Autopilot A/P Engage Engage Limit Roll: Up to ± 15^o Engage Pitch: Up to ± 20^o Basic Touch Control Roll Control Limit Roll: Up to ± 32^o Autopilot Steering (TCS) Pitch Control Limit Pitch: Up to ± 20^o Turn Knob Roll Angle Limit ± 30° Roll Rate Limit ± 5.5^o /sec Pitch Wheel Pitch Angle Limit ± 20° pitch Heading Hold Roll Angle Limit Less than 6^o and no roll mode selected Heading Heading SEL knob on Roll Angle Limit ± 25° Select HIS or remote slew knob on console Roll Rate Limit + 3.0°/sec Capture VOR Course Knob, Beam Angle Intercept Up to ± 90° or NAV Receiver (HDG SEL) VORAPR and DME Receiver Roll Angle Limit ± 25^o Roll Rate Limit ± 5^o /sec VORAPR ± 3^o /sec VOR Course Cut Limit at Capture ± 30° course Capture Point Function of beam, beam rate, course error, and DME distance. Maximum trip point is 175 mV. Minimum trip point is 30 mV. On Course Roll Angle Limit ± 13^o Crosswind Correction Up to ± 45^o course error in VOR, Over Station ± 30^o in VORAPR Course Change Roll Angle Limit Up to ± 30^o' Roll Rate Limit ± 17^o + 3^o /sec LOC Capture LOC or Course Knob Beam Intercept Up to ± 90^o APR or and BC NAV Receiver Roll Angle Limit ± 25^o and Roll Rate Limit ± 5.5^o /sec 3-43