TM 1-1510-233-CL
N-2
18. GPU – Check connected and DC voltage if
steps 19 through 25 are to be performed.
19. Overhead control panel switches – Set as re-
quired.
20.
Mission control panel switches and circuit
breakers – Check and set as required.
21. INS Alignment – Align as required.
22. Pilot’s and copilot’s EFIS TEST switches – De-
press. Verify indications.
23. Automatic flight control system – Check as re-
quired.
24. ASE/ACS BIT Checks – Perform as required.
25. ASE/ACS Programming – Program as re-
quired.
26. Avionics – Check and set as required.
27. BATTERY switch – As required.
28. Toilet – Check condition.
29. Emergency equipment – Check.
(O)
30. Parachutes – Check.
FUEL SAMPLE AND OIL CHECK
*1. Fuel sample – Check collective fuel sample
from all drains for possible contamination.
EXTERIOR CHECK
LEFT WING AREA
1. Left Wing – Check.
2. Left main landing gear – Check.
