TM 1-1510-233-CL
N-8
4. TGT and N1 – Monitor (TGT 1000 C maxi-
mum).
5. Oil pressure – Check (60 PSI minimum).
6. ENG START switch – OFF after TGT peaks.
7. AC and DC GPU units – Disconnect (check air-
craft external power and mission external pow-
er annunciators extinguished).
8. CONDITION levers – HIGH IDLE.
9. PROP levers – HIGH RPM.
10. #1 and #2 INVERTER switches – ON. Check
INVERTER annunciators extinguished.
11. GENERATOR switch (1) – Reset, then ON.
12. Current limiters – Check.
13. GENERATOR switch – Second switch reset,
then on.
14. BEACON lights switch – Reset, then on.
BEFORE TAXIING
*1. BRAKE DEICE switch – Check and set as re-
quired.
*2. CABIN AIR MODE and TEMP controls – Set
as desired.
3. AC/DC power – Check.
*4. AUTO PLT POWER switch – ON.
*5. AVIONICS MASTER POWER switch – ON.
*6. #1 and #2 EFIS POWER switches – ON.
*
7.
Mission control panel switches – Set and
checked as required.
