TM 1-1510-218-CL
E-3
ENGINE RESTART DURING FLIGHT (USING
STARTER)
1. CABIN AIR/TEMP MODE switch – OFF.
2. Electrical load – Reduce to minimum.
3. FIRE PULL handle – In.
4. POWER lever – IDLE.
5. PROP lever – FEATHER.
6. CONDITION lever – FUEL CUTOFF.
7. TGT (operating engine) – 700 ºC or less.
8. Engine – Start.
9. GEN switch – RESET, then ON.
10. Engine cleanup – Perform if engine restart is
unsuccessful.
11. CABIN AIR/TEMP MODE switch – As required.
12. Electrical equipment – As required.
13. ENG AUTO IGN switch – ARM.
14. PROP SYNC switch – As required.
15. POWER – As required.
ENGINE RESTART DURING FLIGHT (NOT
USING STARTER)
1. CABIN AIR/TEMP MODE switch – OFF.
2. Electrical load – Reduce to minimum.
3. GEN switch (affected engine) – OFF.
4. FIRE PULL handle – In.
5. POWER lever – IDLE.
