TM 1-1510-218-CL
N-6
*SECOND ENGINE START (GPU START)
1. Propeller area – Clear.
2. Engine – Start.
3. Engine and systems instruments – Check.
4. Right PROP lever – FEATHER.
5. GPU – Disconnect.
6. Right PROP lever – HIGH RPM.
7. INVERTER switches – ON, check INVERTER
lights OFF.
8. GEN switches – RESET, then ON.
9. CONDITION levers – As required.
10. Red anticollision light – Reset.
BEFORE TAXIING
*
1. BLEED AIR VALVES – As required.
*
2. BRAKE DEICE – As required.
*
3. CABIN TEMP MODE and temperature switches –
Set as desired.
H 4. AC/DC power – Check.
*
5. AVIONICS MASTER POWER switch – ON.
*
6. Avionics controls – As required.
H 7. Electric elevator trim, autopilot/flight director
operation C D1 – Check as required.
H 8. Autopilot trim fail system C D1 – Check.
H 9. Automatic flight control system D2 – Check as
required.
