5-7. REMOVE/INSTALL SURGE TANK.
This task covers:
General Mechanics Tool Kit, Item
Teflon Tape, Item 46, Appendix E
1, Appendix B
Remove Surge Tank. (Figure 5-3).
Turn the WATER PUMP switch located above the sink, to the OFF position.
Open circuit breaker CB16 located in the panelboard assembly.
Open water faucet to relieve water pressure from the system.
Disconnect pipe union joint.
Lift defective surge tank from the storage cabinet.
Remove union fitting and pipe from surge tank.
Remove teflon tape from pipe and union.