TM 55-1730-201-12
(3) Remove
the lock assembly (7) from the
sleeve assembly (6).
(4) Remove the bushing (9) from the rod assem-
bly (14).
(5) Remove
the retaining
ring (8) from the
sleeve assembly (6).
(6) Remove the rod assembly (14) from the
actuating cylinder (1) and remove the retaining
ring (10), piston (12), and preformed packing (13)
from the rod. Remove the preformed packing (11)
from the piston.
c. Cleaning, Inspection, and Repair.
(1) Clean all metal parts with cleaning solvent,
Federal Specification P-D-680, and dry thoroughly.
(2) Inspect
the rod assembly packings for
scores or damaged condition. Replace a bent rod
assembly.
(3) Inspect the piston rod bushing and piston
for nicks or scratches. Polish out any small nicks
or scratches.
(4) Inspect the shell and sleeve assemblies
for scratches or scoring. Polish out any small
nicks or scratches.
(5) Replace any defective parts.
d. Reassembly.
(1) Install the preformed packing (13, figure 6)
Figure 6. Hydraulic Cylinder Assembly, Exploded View.
13
