TM 55-1680-317-23&P
2-13. INDIVIDUAL COLD CLIMATE SURVIVAL KIT-Continued
NOTE
If the center sealing tape, which effects the vacuum pack seal of the SRU-15/P
sleeping bag container, has been broken or removed for any reason, DO NOT attempt
to repack the bag In the container or to reseal the container. Replace the complete
SRU-15/P sleeping bag with a new unit.
e. Repacking the Survival Kit. Repack the components of the individual cold climate survival kit within the kit
outer and inner cases using applicable procedures cited in paragraph 2-12d, the original kit packing details, the
individual 9- by 12-inch kit packing list, and the details shown in figure 2-12. Ensure the kit operator's manual,
TM 55-1680-348-10, is stowed and secured within the kit outer case exterior pocket.
NOTE
Prior to repacking the survival manual (AFM 64-5 or FM 21-76) and the operator's
manual (M 55-1680-348-10) In the kit, place each of the publications in an Individual
compatible sized plastic polyethylene bag with interlocking closure to prevent
exposure of the printed matter to moisture.
NOTE
Give serviceable poncho a light dusting of Talc, Technical: Powder, NSN 6810-00-270-
9989 before repacking to prevent the poncho's plastic materiel from sticking together.
Change 2
2-52
