FIGURE 7.
TM 55-1510-222 MTF
FIGURE 7.
TM55-1510-222MTF
TM 55-1510-222 MTF
1. Engine an flight instruments
___KIAS at stall, roll ____°L or R.
2. Engine control levers
5. Flap operation
3. Vertical speed indicators
a. Flap retraction time ___ seconds
4. Surface deice
b. Flap extension time ____ seconds
5. Antenna deicve
7. Autoignition
6. Propeller deice
8. Propeller feathering
7. Windshield anti-ice
9. Propeller autofeathering and
8. Radome anti-ice
unfeathering, time from fuel cutoff to
9. Waveguide pressurization
rotation stop L____seconds,
10. Cabin and cockpit ventilation
R____seconds,
11. Air conditioning and heating
10. Landing gear warnings horn,
12. Air conditioning cold operation
N1 on first hearing norn ____%
13. Carbon monoxide
11. Landing gear extension time
C R U I S E
a. Landing gear extension time
1. ENGINE INSTRUMENT INDICATIONS
____seconds
2. Wings AND NACELLES
b. Landing gear retraction time
3. Cabin noise level
_ _ _ s e c o n d s
4. Pilot's alternative static air source
12. Emergency landing gear extension
5. Propeller synchrophaser
DESCENT AND LOW LEVEL CRUISE
6. Ice vanes
1. maximum rate (Vmo) descent:
7. Turn and bank indicators
a. Flight controls
LOW SPEED SYSTEMS
b. Windows and doors
1. stall speed, stall warnings, and stall
2. Excess nose down trim
characteristics (clean, power off),
LANDING
___KIAS at warnings, ____KIAS at
1. Brake Operation
stall, roll ___°L or R.
2. Propeller reversing, L___%N1
2. Stall speed, stall warnings, and stall
R _ _ _ % N1
characteristics (clean, power on),
3..Oil temperature, L___°C
___KIAS at warning, ___KIAS at
R____°C
stall, roll ___°L or R.
4. Oil pressure, L___PSI, R___PSI
3. Stall speed, stall warning, and stall
ENGINE SHUTDOWN
characteristics(gera and flaps down
1. Battery condition
power off), ___KIAS AT warnings,
BEFORE LEAVING AIRCRAFT
___KIAS at stall, roll ____°L or R.
1 . B a t t e r y c o n d i t i o n
4. Sttall speed, stall warnings, and stall
2. Aircraft forms
characteristics (gear and flaps down,
SPECIAL PROCEDURES
power on), _____KIAS at warnings,
1. Pressurization