TM 55-1510-219-CL
3.
TGT- Monitor.
4.
Ignition and engine start switch - OFF after TGT stabilized.
ENGINE CLEARING
1.
Condition lever - FUEL CUTOFF.
2.
Ignition and engine start switch - OFF.
3.
Ignition and engine start switch - STARTER ONLY.
4.
Ignition and engine start switch - OFF.
FIRST ENGINE START (GPU START)
1.
INS - As required.
2.
Avionics master switch - As required.
3.
Exterior light switches - As required.
4.
Ignition and engine start switch - ON.
5.
Condition lever (after N1, RPM stabilizes, 12% minimum) - LOW
IDLE.
6.
TGT and N1 - Monitor (TGT 1000°C maximum, N1 52% minimum).
7.
Oil pressure - Check (60 PSI minimum).
8.
Ignition and engine start switch - OFF after TGT stabilized.
9.
Condition lever - As required.
10.
DC GPU disconnect - As required.
11.
Generator switch (GPU disconnected) - RESET, then ON.
12.
Condition lever - HIGH IDLE.
N-10
