TM 55-1510-219-CL
3.
Ignition and engine start switch - ON.
4.
Condition lever (after N1 RPM stabilizes, 12% minimum) - LOW IDLE.
5.
TGT and N1 - Monitor (TGT 1000°C maximum, N1 52% minimum).
6.
0il pressure - Check (60 PSI minimum).
7.
Ignition and engine start switch - OFF after TGT stabilized.
8.
Condition lever- HIGH IDLE.
9.
Generator switch - RESET, then ON.
SECOND ENGINE START (BATTERY START)
1.
First engine generator load - 50% or less.
2.
Ignition and engine start switch - ON.
3.
Condition lever (after N1 RPM passes 12% minimum) - LOW IDLE.
4.
TGT and N1 - Monitor (TGT 1000°C maximum, N1 52% minimum).
5.
Oil pressure - Check (60 PSI minimum).
6.
Ignition and engine start switch - OFF.
7.
Battery charge light - ON.
8.
Second engine generator - RESET, then ON.
9.
Inverter switches - ON.
10.
Condition levers - As required.
ABORT START
1.
Condition lever - FUEL CUTOFF.
2.
Ignition and engine start switch - STARTER ONLY.
N-9
