TM 55-1510-219-10
f.
INSERT/ADVANCE
pushbutton - Press.
(Observe that extra precision display related to the
resident value of northing and easting, to nearest meter,
appears in left and right data displays, respectively.)
NOTE
UTM data may be loaded in any order.
Until final fourth entry, actuation of
INSERT/ADVANCE pushbutton without
a prior data entry will cause normal
and extra precision UTM data to be
alternately displayed.
g.
To load extra precision
easting value - Press
keys in sequence, starting
with "E".
(Example: 297 m East = E 297. Observe that
easting meters appear in right data display as keys are
pressed.)
h.
INSERT/ADVANCE
pushbutton - Press.
(Observe pushbutton remains illuminated.)
i.
To load extra precision
northing value - Press
keys in sequence, starting
with "N" or "S".
(Example: 901 m North = N 901. Observe that
northing meters appear in left data display as keys are
pressed. The value is always added to normal value
regardless of which key (N/S) is pressed to initiate entry.
The normal entry establishes hemisphere.)
j.
INSERT/ADVANCE
pushbutton - Press.
(Observe that during the next 1 to 3 seconds, the
computer converts input into latitude and longitude for
storage in memory. The stored value is again converted
back
to
UTM
for
display
to
operator.
The
INSERT/ADVANCE pushbutton light extinguishes. The
conversion routines may cause data displays to change
by up to 10 m.)
NOTE
The computer will convert coordinates
in overlap area; however, data display
values will reference appropriate zone.
NOTE
The "W" key may be used to initiate
easting
entries;
however,
the
computer will al-
ways interpret such entries as an E
input. "E" will be displayed in normal
UTM data display.
NOTE
The extra precision values are always
added to normal values. As an
example,
South
4,476.995
m
will
display "4476 S" in normal display and
"995" in extra precision display. In
other words, there is no rounding
between the two displays.
k.
INSERT/ADVANCE
pushbutton - Press.
(Observe right data display indicates last previously
inserted altitude, and left data display is blank.)
l.
To indicate the following
load is altitude - Press
keys "4" or "6".
(Observe
INSERT/ADVANCE
pushbutton
light
illuminates.)
m.
To load altitude in feet -
Press keys in sequence.
(Example: 1230 ft = 1230. Observe that numbers
appear in right data display as keys are pressed.)
NOTE
Altitude inputs are limited to 15,000 feet.
n.
INSERT/ADVANCE
pushbutton - Press.
(Observe pushbutton light extinguishes.)
o.
INSERT/ADVANCE
pushbutton - Press.
(Observe that left data display indicates last
previously inserted channel number, and right display is
blank.)
p.
To indicate following load
is channel number -Press
keys "2" or "8"
(Observe
INSERT/ADVANCE
pushbutton
light
illuminates.)
q.
To load channel number -
Press keys in sequence.
(Example: 109 = 109. Observe number appears in
left
data
display
as
keys
are
pressed.)
3-55