5.5.4
Spray Tank
The recommended way to repair minor cracks, holes or other leaks in the spray tank is to push epoxy
resin through opening and permit it to cure for the required amount of time. Larger damage requires use of a reinforcing
patch of glass or linen cloth on top of previously applied epoxy. The patch should be completely covered with epoxy and
permitted to cure. The size and nature of damage may indicate the need for additional layers of patching material.
NOTE:
TANK AREAS TO BE REPAIRED MUST BE PREPARED
BY THOROUGH CLEANING AND ROUGHING OF THE
SURFACE.
5.5.5
Spray Nozzles
(1)
If spring check valve in nozzle fatigues and breaks, replace entire nozzle cap assembly.
(2)
Upon deterioration of nozzle diaphragm, remove and replace.
42
