6645 SYNCHROMATIC WINDMILL INSTRUCTIONS
1.
The 6645 Synchromatic Windmill has been designed to fit directly to the AGAVENCO 6300 pump.
2.
For installation remove the three bolts installed, to hold hub together for shipping, and replace with the three
AN3-22 A bolts (Nylock)
CAUTION:
DO NOT TIGHTEN "HE AN3-22 A BOLTS SO TIGHT THAT THEY RESTRICT BLADES
FROM TURNINC, ALSO CAUSING UNDUE HUB STRESSES.
3.
Blade pitch angle, on all blades, is controlled by external nut shown as number five (5) on Figure 5.
NOTE:
ALWAYS SET BLADE TO PITCH SETTING BY STARTING FPOM A COMPLETE
COUNTER CLOCKWISE POSITION.
4.
Set base of propeller blade to desired pitch setting number, which is located on hub boss.
ACTUAL TIP
PITCH SETTING
ANGLE
NUMBER
35
2 1/2 pitch or greater
30
2 pitch or greater
25
1 1/2 pitch or greater
20
1 pitch or greater
34
