TM 10-8415-206-12&P
3-2. OPERATOR'S TROUBLESHOOTING PROCEDURES-Continued
Table 3-1. Operators' Troubleshooting-Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
UNABLE TO KEEP MICROPHONE IN POSITION WHERE PLACED.
Inspect boom assembly for loose screws at mid point and at microphone end of boom.
If unable to tighten, report condition to organizational maintenance.
7.
UNABLE TO HEAR.
Insure cord is plugged into receptacle and ICS box is working. Check left rear side of helmet and insure
helmet connector is secured.
If still unable to hear, report to Organizational Maintenance.
Change 4
3-3
