TM10-6640-216-13&P
5-10. REMOVE/INSTALL FAUCET ASSEMBLY.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit, Item 1, Appendix B
Materials/Parts Required
Teflon Tape, Item 46, Appendix E
REMOVAL
Remove Faucet Assembly. (Figure 5-6).
a.
Pop up sink from cabinet.
b.
Remove large reducer from faucet and remove hose.
c.
Remove faucet mounting nut, lockwasher and gasket.
d.
Pull the faucet out of faucet mount and place faucet and attached fittings on a working
surface.
e.
Clean teflon tape from pipe and fittings.
INSTALLATION
Install Faucet Assembly. (Figure 5-6).
a.
Guide the faucet into the faucet mount.
5-15
