TM10-6640-216-13&P
4-36. REMOVE/lNSTALL DESICCATING CABINET.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit, Appendix B, Item 1,
Materials/Parts
Adhesive, Appendix E, Item 2
Rubber Gasket, Appendix E, Item 47
REMOVAL
1.
Remove desiccating cabinet. See figure 4-30.
a.
Remove two desiccating mounting bracket nuts, lockwashers and flat washers.
b.
Remove desiccating cabinet bracket.
c.
Carefully remove defective desiccating cabinet from shelf.
2.
Remove damaged door gasket,
a.
Remove damaged molded rubber gasket from door.
b.
Clean old adhesive from gasket groove on door.
INSTALLATION
1.
Install door gasket.
a.
Coat gasket groove with adhesive.
b,
Carefully install new molded rubber gasket in groove on door.
2.
Install desiccating cabinet. See figure 4-30.
a.
Place new desiccating cabinet on shelf located above first aid kit.
b.
Place the desiccating cabinet mounting bracket around the desiccating cabinet and
shelf.
c.
Install two flat washers, two lockwashers and two bracket nuts.
4-98
