TM 1-1510-225-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
BEFORE STARTING ENGINES (CONT)
NOTE
Refer to operator’s manual or aircraft placarding
to determine conditions affecting standby compass
headings.
*7. Magnetic compass - Check for fluid,
heading, and current correction card
*8. Free air temperature gage - Check.
Note current reading.
9. Pedestal controls - Check.
(a) POWER levers - IDLE.
(b) PROP levers - HIGH RPM.
(c) CONDITION levers - Fuel cut-
off.
(d) Trim tabs - Set.
(e) Landing gear alternate extension
handle - Stowed
10. Pedestal - Check.
(a) EFIS POWER switches - OFF.
(b) AP/TRIM POWER switch -
OFF.
(c) CABIN PRESS switch - PRESS.
(d) RUDDER BOOST switch - On.
(e) Elevator trim switch - On.
(f) Pressurization controller - Set.
11. Copilot’s instrument panel - Set.
(a) Compass control - SLV.
2-12
