TM
1-1510-225-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
PRIOR TO MAINTENANCE TEST FLIGHT (CONT)
*24. Toilet - Check condition.
*25. Emergency equipment - Check that all
required emergency equipment is
available and that fire extinguishers
and first-aid kits have current inspec-
tion dates.
*26. Check all interior and exterior placards
and markings.
*27. Trim tab travel and direction - Check.
Operate trim tabs through the full
range of travel, noting any excessive
looseness, friction, or binding. Check
tab direction and neutral position at
the control and the surface.
*28. Right controls - Check operation and
direction. Check movement of control
surfaces for direction with movement
of cockpit controls. Check for any
abnormal friction or obstructions
through full range of travel.
29. GPU - Connect as required
30. BATT switch - As required.
C12
INTERIOR CHECK
1. Loose equipment - Check secured.
NOTE
The procedures below check both cargo and cabin
door security provisions.
*2. Cabin/cargo doors - Test and lock:
(a) Cabin door - Check closed and
latched by the following:
2-8
