TM 1-1510-225-10
3B-59
Figure 3B-20. Master Power Page
Table 3B-12. Master Power Page
NO.
DESCRIPTION/FUNCTION
1
Select index 1 page.
2
Access Master Power page.
3
To set all communication radio power to
ON.
4
Toggle individual unit power ON or OFF.
5
To set all communication radio power to
OFF (requires confirmation).
d. System Initialization.
(1) Initialization Overview. The FMS-800
system preflight initialization includes confirming or
entering the current position, time, and date for GPS
initial acquisition. It also verifies the cartridge
effectivity date of the data loader cartridge and erasing
or loading of flight plan and mission data.
(2) Initialization
Procedures.
A
normal
preflight start-up procedure is as follows:
1. Verify or enter position, time, date,
and chart datum on the Start 1 page.
Refer to Figure 3B -21 and Table
3B-13. Normally the GPS will provide
the correct position, time, and date
shortly after the GPS power is turned
on.
Figure 3B-21. Start 1 Position/Time Initialization
Table 3B-13. Start 1 Position/Time
Initialization Procedures
NO.
DESCRIPTION/FUNCTION
1
Enter airport identifier in Scratchpad.
2
Press Left Line Key 1.
3
Verify the Lat and Long.
4
Verify UTC date, change as required.
5
Verify UTC time, change as required.
6
Verify current system datum.
7
Scroll to Start page 2.
2. Press Left Line Key 1, then scroll to
Start page 3. Refer to Figure 3B-22
and Table 3B -14.
Figure 3B-22. Start 2 Navigation/ Initialization
