TM 1-1510-225-10 3B-47 Table 3B-9.  CDU Annunciations and Scratchpad Messages  (Continued) ANNUNCIATION /SP MESSAGE INITIATING CONDITION RESET MECHANISM LOCATION BLINKING NOT CLEARABLE CDU MSG ALERT CONFIRM SAVE PTS Request to save markpoint and waypoint lists to the data cartridge. Clear key or reselect SAVE MKPT/WPT. SP N CONFIRM SAVE STATUS Request to save markpoint and waypoint lists to the data cartridge. Clear key or reselect SAVE STAT. SP N CONFIRM SID RPLACE Request to replace a SID in the flight plan. Clear key or reselect the line select key. SP N CONFIRM STAR RPLACE Request to replace a STAR in the flight plan. Clear key or reselect the line select key. SP N CONFIRM SYSTEM TEST Request to initiate test on all LRUs controlled by FMS- 800.   Clear key or reselect SYSTEM. SP N CONFIRM UPDATE AJ Attempting to update the CNMS antijam preset list with the V/UHF antijam preset list. Clear key or reselect UPDATE AJ PRESETS. SP N CONFIRM ZERO ALL Request to zeroize the system. Clear key or reselect ZERO ALL. SP N crp active Closed random pattern is currently being executed. Closed random pattern canceled. A N X CRP IS ACTIVE Attempt to delete or modify the closed random pattern fix or delete MFP attribute or modify the flight plan course or attempt to insert a PPOS hold or insert a waypoint at the active waypoint during pattern execution. Clear key SP A CRS CHANGE > 90     Attempt to apply course edit greater than 90 degrees from the current inbound course while in automatic or flyover leg sequence mode. Clear key SP A crs reversal Generated at 3 nm from a course reversal procedure execution. Enabling the holding pattern at the TO or switched to capturing inbound leg of course reversal or sequencing by the FAF or IAF. A N X CRS RVRSL IS ACTIVE Attempt to delete the active waypoint, modify the flight plan course, or attempt to insert a PPSN hold or insert a waypoint at the active waypoint during course reversal execution. Clear key SP A