TM 1-1510-224-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
*(f)
Airspeed (at warning and at stall) -
Record (KIAS)
*(g) Roll - Controller within 15 degrees
left or right.
* 3.
Stall speed, stall warning, and stall
characteristics (clean, power on) - Check
as follows:
(a) Gear - UP.
(b) Flaps - UP.
(c) Propellers - Set 1700 RPM.
(d) POWER levers - Set 54% torque.
(e) Trim aircraft to trim speed as shown
in figure 2.
(f)
Airspeed - Reduce by one knot/
second until aircraft stalls.
*(g) Airspeed (at warning and at stall) -
Records (KIAS).
*(h) Roll - Controllable within 15 degrees
left or right.
* 4.
Stall speed, stall warning, and stall
characteristics (gear down and flaps
approach, power off) - Check as follows:
(a)
Flaps - APPROACH (40%), below
197 KIAS.
(b)
Gear - DN, below 179 KIAS.
(c)
Power - IDLE.
(d)
Trim aircraft to trim speed as shown
in figure 2.
(e)
Airspeed - Reduce by one knot/
second until aircraft stalls.
2-69
