TM 1-1510-224-10
2.
Flight plan Build as follows:
a.
WPT numbers Enter into scratchpad
in order of desired use (up to nine) or
box desired WPTs with PREV (R2) or
NEXT (R3) and depress LOAD
SCRATCH PAD (L5).
b.
ROUTES (R5) Depress.
c.
Route Select 1st, 2nd, or 3rd to enter
WPT numbers by depressing the
appropriate line button to store the
WPTS as a route.
d.
Route Select route to use as the
active
FPLN
and
depress
the
adjacent line button to box it.
e.
NEW FPLN (LI) Depress to activate
the FPLN.
3.
TACAN list Build as follows:
a.
Mode switch B Depress to select
FLIGHT PLAN page.
b.
NAV SETUP (R5) Depress.
c.
INS SETUP (R5) Depress.
d.
TACAN LIST (R4) Depress.
e.
TACAN
station
information
(list
number,
ID,
channel
number,
latitude/longitude,
and
station
elevation) Enter into scratchpad.
f.
R1 line selection switch Depress to
load into system.
g.
TACAN stations to be used for
updating Enter into scratchpad.
h.
R4 line selection switch Depress to
select TACAN SELECT.
4.
Pattern steering mode Program as follows:
a.
Mode switch B Depress to select
FLIGHT PLAN page.
b.
R5 line selection switch Depress to
select NAV SETUP page.
c.
True bearing Enter into scratchpad.
d.
LI line selection switch Depress to
enter BEARING.
e.
Leg
length
in
NM
Enter
into
scratchpad.
f.
L2 line selection switch Depress to
enter LEG LENGTH.
g.
L3 line selection switch Depress to
select LEFT or RIGHT.
h.
Offset distance in NM Enter into
scratchpad.
i.
L4 line selection switch Depress to
enter OFFSET.
5.
Waypoint move Program as follows:
a.
Mode switch B Depress to select
FLIGHT PLAN page.
b.
R5 line selection switch Depress to
select NAV SETUP page.
c.
True bearing Enter into scratchpad.
d.
RI line selection switch Depress to
enter BEARING.
e.
Range in NM Enter into scratchpad.
f.
R2 line selection switch Depress to
enter RANGE.
(4)
Navigation Information.
1.
B mode selector switch Depress to select
FLIGHT PLAN page.
2.
L4 line selector switch Depress to select
NAV DATA information box. The following
information is provided in the NAV DATA
box:
(a)
Present position. The present position
(PRESENT POS) display shows the actual
latitude and longitude coordinates of the
point on the earth's surface directly below
the aircraft at any given instant.
(b)
Navigation status. The navigation status
display
(NAV
STATUS)
shows
the
alignment status of the INS by a number (1
through 9).
(c)
Ground track angle. The ground track
angle (TRK) is the clockwise angle from
true north to an imaginary line on the
earth's
surface
connecting
successive
points over which the aircraft has flown
(ground track).
(d)
Wind direction and wind speed. Wind
direction and wind speed are shown in the
TRU WIND display. Wind direction is the
clockwise angle from
3-73
