TM 1-1510-223-CL
E-5
3. AUTO PLT POWER switch – Off.
4.EFIS POWER switches (2) – OFF (if
conditions permit).
5. Radar – SBY or OFF.
6. POWER lever – IDLE.
7. PROP lever – Low RPM.
8. CONDITION lever – FUEL CUTOFF.
9.FIRE PULL handle – Push in (to extinguish
annunciator).
10.ENG START switch – START-IGNITION.
Check IGN ON annunciator illuminated.
11.
CONDITION lever – LOW IDLE.
12.
ENG START switch – OFF after TGT peaks.
13.
CONDITION lever – HIGH IDLE.
14. PROP lever – As required.
15. POWER lever – As required.
16. Engine cleanup – Perform if engine start was
unsuccessful.
17.
GENERATOR switch – RESET, then ON.
18.
Engine AUTO IGNITION – As required.
19. PROP SYNC switch – As required.
