TM 1-1510-218-CL
E-10
ELECTRICAL FIRE
1. Crew oxygen masks – As required.
2. Passenger oxygen – As required.
3. MASTER SWITCH – OFF. (Visual conditions
only).
4. AII nonessential electrical equipment – OFF.
5. BATT switch – ON.
6. Generator switches (individually) – RESET, then
ON.
7. Circuit breakers – Check for indication of defective
circuit.
8. Essential electrical equipment – ON (individually
until fire source is isolated).
9. Land as soon as practicable.
SMOKE AND FUME ELIMINATION
1. Crew oxygen masks – 100% and on.
2. Passenger oxygen – ON.
3. BLEED AIR VALVE switches – ENVIRO OFF.
4. VENT BLOWER switch – AUTO.
5. AFT VENT BLOWER switch – OFF.
6. CABIN AIR/TEMP MODE switch – OFF.
7. If smoke and fumes are not eliminated, CABIN
PRESS switch – DUMP.
8. Passenger oxygen masks – Check. Confirm that
all
passengers
are
receiving
supplemental
oxygen.
9. Engine oil pressure – Monitor.
