Figure 4-1. Cover Assembly, Board and Switch Assembly Removal.
Section Il. CLEANING AND INSPECTION
a. Carefully inspect cells for dents, scraps,
a. Clean exterior of carrying case with soap
b. Check cell action by connecting cell to kit.
b. Clean all electrical parts by blowing out
Press hand on top of cell while watching milli-
with dry compressed air to remove dust particles.
ammeter for a slight positive needle deflection.
Wipe all components and accessories with
Inspect all parts for physical damage.
a soft, clean, lint free cloth.
d. Check electrical parts, referring
4-2 through 4-9 and table 4-1.