TM 55-1680-317-23&P
2-12. INDIVIDUAL HOT CLIMATE SURVIVAL KIT-Continued
Figure 2-8. Attaching strap replacement details, typical
4. Pass one end of the webbing length around the snap attaching bar to form a loop on the snap bottom
end and aline the webbing ends. Secure the doubled webbing by stitching a box-stitch formation along
the full length of the webbing to a point 3/4 inch from the formed loop on the snap. Make the stitching
1/8 inch in from the webbing edges in accordance with paragraph 2-7, using the specifics in table 2-3.
5. With the face of the ejector snap facing down, pass the running end of the replacement attaching strap
around the raised part of the quick fit adapter center sliding bar and back toward the ejector snap as
shown in figure 2-8.
6. Make a double 3/4-inch foldback on the strap running end and secure the foldback on the strap running
end with two rows of stitching using the details in figure 2-8 and the specifics in table 2-3. Stitching will
be made in accordance with paragraph 2-7.
2-44
