TM 55-1510-221-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
FIRST ENGINE START (BATTERY START)
(CONT)
11. Generator switch RESET, then ON
SECOND ENGINE START (BATTERY START)
1.
Propeller Clear
2.
Ignition and engine start switch
A1-8
ON Propeller should begin to rotate and
associated
IGN
ON
light
should
illuminate Associated FUEL
PRESS light should extinguish
3
Condition lever (after N1 RPM
E1,J1
passes 12% minimum) LOW IDLE
4.
TGT
and
N1
Monitor
(TGT
1000°C
maximum, NI 52% minimum)
5.
Oil pressure Check (60 PSI minimum)
E7-9
6.
Ignition and engine start switch OFF after
TGT stabilized
7.
Battery charge light Check (light
C-38
should illuminate approximately 6 seconds
after generator is brought on line Light
should extinguish within 5 minutes following
a normal engine start on battery)
8.
Inverter switches ON, check INVERTER
annunciator lights extinguished.
9.
Second engine generator switch RESET,
then ON
2-16
