TM 55-1510-219-10
g.
Flow indicator-Check, during inhalation
blinker appears, during exhalation blinker
disappears). Repeat a minimum of 3
times.
3.
Flight controls-Unlock and check.
4.
Parking brake-Set.
5.
Manual trim-Zero.
6.
Gear-Down.
7.
Ice vanes-IN.
8.
Overhead panels witches and circuit breakers-
Set as follows.
a.
Circuit breakers-Check.
b.
Light dimming controls-As required.
c.
Cabin temperature mode-OFF.
d.
Ice and rain switches-As required.
e.
Exterior light switches-As required.
f.
Master panel light switch-As required.
g.
Inverter switches-OFF.
h.
Avionics
master
power
switch-As
required.
i.
Environmental switches-As required.
j.
Autofeather switches-OFF.
k.
#1 ignition and engine start switch-OFF.
l.
Master switch-OFF.
m.
#2 ignition and engine start switch-OFF.
n.
Standby pump switches-OFF.
o.
Auxiliary transfer switches-AUTO.
p.
Crossfeed switch-OFF.
9.
AC and DC GPU's-As required.
10.
External power advisory lights-As required.
11.
Keylock switch-ON.
12.
Fuel
pumps/crossfeed
operation-Check
as
follows:
a.
Fire pull handles-Pull.
b.
Standby pump switches-ON.
c.
Battery switch-ON.
d.
#1 and#2 fuel press warning lights-
Illuminated.
e.
Fire pull handles-IN.
f.
#1 and#2 fuel pressure warning lights-
Extinguished.
g.
Standby
pump
switches-STANDBY
PUMP.
h.
#1 and #2 fuel pressure warning lights-
Illuminated.
i.
Crossfeed-Check.
Check
system
operation
by
activating
switch
momentarily left then right, noting that
#1/#2
FUEL
PRESS
warning
lights
extinguish
and
that
the
FUEL
CROSSFEED advisory light illuminates
as switch is energized.
13.
DC power-Check (24 VDC minimum for battery,
28 maximum for GPU starts).
14.
Lighting systems-Check.
15.
Anti-ice systems-Check.
a.
Stall warning heat switch-ON.
b.
Pitot heat switches (2)-ON. Check cover
removed.
c.
Fuel vent heat switches (2)-ON.
d.
Left wing heated fuel vent-Check by feel
for heat and condition.
e.
Stall warning vane-Check by feel for heat
and condition.
f.
Left pitot tube-Check by feel for heat and
free of obstructions.
g.
Right pitot tube-Check by feel for heat
and free of obstructions.
h.
Right wing heated fuel vent-Check by feel
for heat and condition.
i.
Stall warning heat switch-OFF.
j.
Pitot heat switches (2)-OFF.
k.
Heated fuel vent switches (2)-OFF.
16.
Annunciator panels-Test as required.
a.
MASTER
CAUTION,
MASTER
WARNING, #1 FUEL PRESSURE, #2
FUEL PRESSURE, GEAR DN, L BL AIR
FAIL, R BL AIR FAIL, ALT WARN, INST
AC, #1 DC GEN, #1 INVERTER, #1 NO
FUEL XFR, #2 NO FUEL XFR, #2
INVERTER, #2 DC GEN-Check on.
b.
ANNUNCIATOR TEST switch-Press and
hold. Check that all lights in aircraft and
mission annunciator panels illuminate,
FIRE PULL handle lights, marker beacon
lights, MASTER CAUTION and MASTER
WARNING
8-3