TM 55-1510-215-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
DURING CRUISE (CONT)
(9) If the terrain band shifts to the right
around the second range marks, increase
tilt angle using TILT control until pattern is
displayed throughout the third range
marks. Note new position of TILT control.
It should not be more than two degrees
above that noted in step (5).
(10) If the terrain band shifts (in step (8)) to
the left around the second range marks,
decrease tilt angle using TILT control until
pattern is displayed throughout the
third range marks. Note new position of
TILT control. It should not be more than
two degrees below that noted in step (5).
2-66
