TM 55-1510-215-MTF
(d)
Set published back azimuth (if applicable).
(e)
On TACAN control-display, set DME station (channel)
and check station identification.
(f)
Fly an approach to the station and verify proper
operation
of
lateral
(course)
and
horizontal
(glideslope) deviation indicators on the HSL
(6)
Check automatic approach mode as follows:
(a)
Select automatic (AUTO) mode.
(b)
Check that AZ indication (MLS control-display) is the
same as that shown for inbound course on approach
plate.
(c)
Check that GS indication is the same as that shown on
the approach plate.
(d)
On TACAN control-display set DME station (channel)
and check station identification.
(e)
Fly an approach to the station and verify proper
operation
of
lateral
(course)
and
horizontal
(glideslope) deviation indicators on the HSI.
*G.
Flight Management System (FMS) Check:
Check as follows:
(1)
Perform self-test as described in TM 55-1510-215-10-2.
(2)
Perform initialization as described in TM 55-1510-215-10-2.
(3)
Check data base as described in TM 55-1510-215-10-2.
4-10
