Chapter 1.0 General Information
Equipment List
Equipment List (cont) - TM-5-6630-218-10_14
Equipment List (cont) - TM-5-6630-218-10_15
Figure 1.1 Loading Plan
1.6 Operating Climatic Conditions
Figure 1.2 Pressure Valve in Closed Position
Chapter 2.0 Operating Instructions
2.3 Operating Instructions for Particulate Contaminants Test
2.3.1.1 Methods for Particulate Contaminants Testing
2.3.3 Inserting the Monitor within Sampler Valve Hose Assembly
Figure 2.3 Removing Protective Plugs from Monitor
2.3.4 Assembling the Sampler Valve Hose Assembly
2.3.6 Connecting the Sampler Valve Hose Assembly to the Quick- Release Valve
Figure 2.7 Three-Way Valve - OFF Position
Figure 2.9 Inserting Sampler Hose Nipple into Sample Valve Collar
Figure 2.10 Attachment of Ground Wire to Assembly
2.3.8 Taking a Sample
Figure 2.13 Replacing the Protective Cap and Plug
Figure 2.14 Removing the Monitor from Sampler
Figure 2.15 Fitting the Monitor into the Two-Way Syringe Valve
2.4 Operating Instructions for API Gravity Tests
2.4.1.1 Method for API Gravity Testing
Figure 2.16 Attaching the Remote Sampling Assembly
2.4.6 Flushing the Inlet Hose
Figure 2.17 Filling the Plastic Cylinder
Figure 2.18 Hydrometer Scale within Fuel Cap
Figure 2.19 Miniscus Cut Point
2.4.9 Finding the Corrected API Gravity, Temperature, and Relative Density
2.5 Operating Instructions for Undissolved Water Test
2.5.1.1 Method for Undissolved Water Testing
Figure 2.21 AC/Internal/External Power Setting
Figure 2.22 Calibration Pad and Calibration Set Code
Figure 2.23 Placement of Calibration Pad in Test Area Window
Figure 2.24 Set the Light-Modulator Lever
Figure 2.25 Calibration Meter Lever Shaft Reading 0
Figure 2.26 Removing the Outer Screw from Calibration Meter Housing
Figure 2.27 Zeroing-Out the Meter Lever
2.5.1.3 Installing the Quick-Release Valve
Figure 2.29 Inserting the Free Water Test Pad in the Monitor
Figure 2.30 Inserting the Monitor into Sampler Base
Figure 2.31 Attaching the Remote Sampling Cap and Bypass Hose
Figure 2.33 Inserting Sampler Hose Nipple into Sample Valve Collar
2.5.7 Taking a Sample
Figure 2.35 Removing Monitor from Sampler
Figure 2.36 Placement of Free-Water Pad in Test Area Window
Figure 2.37 Reading the Undissolved Water Level
Chapter 3. Cleaning and Maintenance
Be sure all parts/components are clean and dry
3.4 Drying and Storage
Equipment List
Equipment List (cont) - TM-5-6630-218-10_14
Equipment List (cont) - TM-5-6630-218-10_15
Figure 1.1 Loading Plan
1.6 Operating Climatic Conditions
Figure 1.2 Pressure Valve in Closed Position
Chapter 2.0 Operating Instructions
2.3 Operating Instructions for Particulate Contaminants Test
2.3.1.1 Methods for Particulate Contaminants Testing
2.3.3 Inserting the Monitor within Sampler Valve Hose Assembly
Figure 2.3 Removing Protective Plugs from Monitor
2.3.4 Assembling the Sampler Valve Hose Assembly
2.3.6 Connecting the Sampler Valve Hose Assembly to the Quick- Release Valve
Figure 2.7 Three-Way Valve - OFF Position
Figure 2.9 Inserting Sampler Hose Nipple into Sample Valve Collar
Figure 2.10 Attachment of Ground Wire to Assembly
2.3.8 Taking a Sample
Figure 2.13 Replacing the Protective Cap and Plug
Figure 2.14 Removing the Monitor from Sampler
Figure 2.15 Fitting the Monitor into the Two-Way Syringe Valve
2.4 Operating Instructions for API Gravity Tests
2.4.1.1 Method for API Gravity Testing
Figure 2.16 Attaching the Remote Sampling Assembly
2.4.6 Flushing the Inlet Hose
Figure 2.17 Filling the Plastic Cylinder
Figure 2.18 Hydrometer Scale within Fuel Cap
Figure 2.19 Miniscus Cut Point
2.4.9 Finding the Corrected API Gravity, Temperature, and Relative Density
2.5 Operating Instructions for Undissolved Water Test
2.5.1.1 Method for Undissolved Water Testing
Figure 2.21 AC/Internal/External Power Setting
Figure 2.22 Calibration Pad and Calibration Set Code
Figure 2.23 Placement of Calibration Pad in Test Area Window
Figure 2.24 Set the Light-Modulator Lever
Figure 2.25 Calibration Meter Lever Shaft Reading 0
Figure 2.26 Removing the Outer Screw from Calibration Meter Housing
Figure 2.27 Zeroing-Out the Meter Lever
2.5.1.3 Installing the Quick-Release Valve
Figure 2.29 Inserting the Free Water Test Pad in the Monitor
Figure 2.30 Inserting the Monitor into Sampler Base
Figure 2.31 Attaching the Remote Sampling Cap and Bypass Hose
Figure 2.33 Inserting Sampler Hose Nipple into Sample Valve Collar
2.5.7 Taking a Sample
Figure 2.35 Removing Monitor from Sampler
Figure 2.36 Placement of Free-Water Pad in Test Area Window
Figure 2.37 Reading the Undissolved Water Level
Chapter 3. Cleaning and Maintenance
Be sure all parts/components are clean and dry
3.4 Drying and Storage
