TM 10-8415-206-12&P
3-16. OUTER SHELL
This task covers:
Inspection
INITIAL SETUP
Tools
Screwdriver, 114 in. wide blade,
modified (figure B-1), flat blade;
Screwdriver, flat blade, 114 in. wide;
Screwdriver, flat balde, 118 in. wide.
Personnel Required
ALSE Specialist or
MOS with ASI of Q2
LOCATION/ITEM
ACTION
REMARKS
INSPECTION
1.
Outer shell (1)
Inspect for:
a.
All screws visible on the outer
shell. Insure all screws are
secure
Use modified screw driver on
inside parts -
2.
Screws (2)
b.
Cracks, nicks, scratches
If the scratches, cracks and nicks
penetrate the resin of the helmet
and
it
cannot
be
feathered
smoothly,
the
helmet
will
be
removed from service.
3-32
