TM 10-8415-206-12&P
4-23. LINER
This task covers:
a. Removal
c. Replacement
b. Inspection
d. Installation
INITIAL SETUP
Tools
References
Screw Driver, Flat Blade, 1/4 inches wide, 4 inches long
TM 11-5965-279-13&P
(NSN 5120-00-222-8852)
Screw Driver (Special Tool), See Fig. B-1
Spatula, 8 in. blade (Special Tool)
(NSN-7330-00-254-4791)
Multimeter AN/USM-223
(NSN 6625-00-999-7465)
Hex key .035
(NSN 5120-00-188-5400)
Materials/Parts
Clean cloths
Liner
Rubber base silicone liner adhesive
(NSN 8040-00-833-9563)
Appendix D, Item No. 10
Sandpaper, Grit 00 (NSN 5350-00-221-0883)
Appendix D, Item No. 7
Sealing Compound
(NSN 8030-00-891-8358)
Appendix D, Item No. 8
Personnel Required
Aviation Life Support Equipment
(A.L.S.E.) Specialist/Technician or
Personnel with ASI of-Q2-(ALSE Qualified)
LOCATION/ITEM
ACTION
REMARKS
NOTE
The liner is made of polyurethane and is of the energy-absorbing type and
consists of one piece that is bonded to the helmet shell.
Change 4
4-65