TM 10-8415-206-12&P
4-21. SUSPENSION ASSEMBLY
This task covers:
a. Inspection
c. Replacement
b. Removal
d. Installation
INITIAL SETUP
Tools
References
Multimeter AN/USM-223
TM 11 -5965-279-13&P
(NSN 6625-00-999-7465)
Hex key .035 inch (.343 cm)
(NSN 5120-00-198-5400)
Screw Driver, Flat Blade, 1/4 inch wide, 4 inches long
(NSN 5120-00-222-8852)
Screw Driver (Special Tool, see fig. B-1)
Materials/Parts
Sealing compound
(NSN 8030-00-891-8358)
Appendix D, Item No. 8
Suspension assembly
Personnel Required
Aviation Life Support Equipment
(A.L.S.E.) Specialist/Technician or
Personnel with ASI of-Q2-(ALSE Qualified)
LOCATION/ITEM
ACTION
REMARKS
NOTE
The suspension assembly is an assembly of straps and
pads attached inside the helmet. Also included in the
assembly are the front and rear headbands. Buckles
provide for adjustments to raise, lower, and fit the wearer's
head.
INSPECTION
Inspect for tears, rips, defective buckles,
unraveled stitching or missing hardware.
Change 4
4-50
