TM 10-6640-216-13&P
CHAPTER 2
OPERATING INSTRUCTIONS
Section I. DESCRIPTION AND USE OF OPERATOR’S CONTROLS AND INDICATORS
Alphabetical Index
Paragraph Title
Paragraph
Damage From Improper Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
Operator’s Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2
2-1. DAMAGE FROM IMPROPER SETTINGS.
All operators should become thoroughly familiar with’ the operator’s controls and indicators, and with
the proper operating procedures for the Airmobile Laboratory. Certain precautions must be observed
in the operation of the equipment and its components. Procedures are presented in set sequence and
must be followed in sequence.
2-2. OPERATOR’S CONTROLS AND INDICATORS.
Table 2-1 contains the controls and indicators for the laboratory exterior. Tables 2-2 through 2-7 are
for the other functional systems within the laboratory. Operator’s controls and indicators for the
laboratory unique equipment are listed in Tables 2-9 and 2-10. The ECU controls are listed in Table
2-8. Operator’s controls and indicators for the refrigerator, convection ovens, gas alarm control unit,
RVP bath, ice maker, gum bath system, copper strip corrosion bath, analytical balance, etc., are
described in their respective TMs (see Appendix A for TM number).
a.
Exterior. Figure 2-1 and Table 2-1 list the laboratory’s exterior controls and indicators.
Table 2-1. Laboratory Exterior Controls and Indicators
Control or Indicator
Function
Blower Exhaust Door
Covers blower louvers for cabinet exhaust
blower assembly. Must be opened during
purge operations.
Purge Port Door
Covers environmental control unit plenum
(one on each side)
intakes. A microswitch senses when door is
opened or closed. Must be opened to initiate
purge cycle.
2-1
