TM 10-6640-216-13&P
4-20. REMOVE/INSTALL PANELBOARD ASSEMBLY - continued.
ASSEMBLY
1.
2.
3.
4.
5.
6.
Install fuseholder and fuse. See figure 4-11.
a.
Install new fuseholder by installing four mounting screws.
b.
Install wires to terminal lugs and remove tags.
c.
Replace new fuse into the appropriate fuse block.
Install socket and relay. See figure 4-11.
a.
Install new socket by installing two mounting screws.
b.
Install wires into appropriate terminals and tighten all terminal screws.
c.
Grasp new relay and install into the socket.
Install relay timer. See figure 4-11.
a.
Install new 6 Mohm resistors to the two inside lugs of the relay.
b.
Install new relay timer and install two mounting screws.
c.
Connect wires to two spade lugs.
Install 15A circuit breaker. See figure 4-11.
a.
Connect all wires to terminal and tighten terminal screw and remove tags.
b.
Guide new circuit breaker into the panelboard and install mounting screw.
Install 20A circuit breaker. See figure 4-11.
a.
Connect all wires to terminal and tighten terminal screws and remove tags.
b.
Guide new circuit breaker into the panelboard and install mounting screw.
Install 100A circuit breaker. See figure 4-11.
a.
Guide new circuit breaker into the panelboard and install with four mounting screws,
b.
Connect all wires and remove tags.
4-48
