TM 1-8415-215-12&P
(2)
FIG Column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in Section II and Section III.
(3)
ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b.
PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
J/sequence (i.e. vertical arrangement of letter and number combination which places the first letter or digit of each group
in order A through Z, followed by the numbers 0 through 9 and each following letter or digit through like order).
(1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a five-digit numeric code
used to identify the manufacturer, distributor, or Government agency etc. that supplies the item.
(2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity) which controls the design and characteristics of the item by means of its
engineering drawing, specification standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and FSCM columns to the left.
(4) FIG. Column. This column lists the number of the figure where the item is identified/located in Section II
and Section III.
5.
Special Information. Use the following subparagraphs as applicable:
a.
USABLE ON CODE. The usable on code appears in the lower left comer of the Description column heading.
Usable codes are shown as "UOC .......... "in the Description column (justified left) on the first line applicable to all
models.
b.
FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part number for bulk materials are also referenced in the description column of the line
entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source codes to be
manufactured or fabricated are found in.
c.
ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in. Items that make up the assembly are listed immediately following the
assembly item or reference is made to an applicable figure.
C-7
