TM 1-1680-359-10
2-2. INTRODUCTION (Cont)
(3)
Location, check/service column. This column provides the location and the item to be checked or
serviced. The item location is underlined.
(4)
Procedure column. This column gives the procedure you must do to check or service the item listed in the
Check/Service column to know if the equipment is ready or available for its intended mission or for operation. You must
do the procedure at the time stated in the interval column.
(5)
Not fully mission capable if: column. Information in this column tells you what faults will keep your
equipment from being capable of performing its primary mission. If you make check and service procedures that
show faults listed in this column, do not operate the equipment. Follow standard operating procedures for maintaining
the equipment or reporting equipment failure.
d.
Other table entries. Be sure to observe all special information and notes that appear in your table.
2-3. SPECIAL INSTRUCTIONS.
a.
The sealed packets are exempt from opening for inspection. The packets are sealed in a NBC protective film
with air evacuated.
2-10
