FIRST ENGINE START (CPU START) (CONT)
After starting the first engine with a GPU, the
second engine is normally started utilizing a bat-
tery start. If a GPU start is required or desired for
the second engine start, then utilize the SECOND
ENGINE START (GPU START) procedure. Oth-
erwise, utilize SECOND ENGINE START (BAT-
TERY START) procedure.
SECOND ENGINE START (CPU START)
1. Propeller area - Clear.
2. IGNITION AND ENGINE START
switch - ON. IGN ON light illumi-
nated and the associated FUEL PRESS
If ignition does not occur within 10 seconds after
moving CONDITION lever to low idle, initiate
ENGINE CLEARING procedure. If for any rea-
son a starting attempt is discontinued, the entire
starting sequence must be repeated after allowing
the engine to come to a complete stop (1 minute
3. CONDITION lever (after N1 RPM sta-
bilizes at or above 12% for 5 seconds)
- LOW IDLE.