TM 1-1510-225-CL
N-6
4. GPU – Disconnect.
5. Right PROP lever – HIGH RPM.
6. GEN switches – RESET, then ON.
7. DC volt/loadmeters – Check loads, voltage, and
current limiters.
8. CONDITION levers – As required.
9. CABIN TEMP MODE – Set.
10. Inverters – Check.
11. AC/DC power – Check.
12. AVIONICS MASTER PWR – ON.
13. STANDBY HORIZON – ON and uncaged.
14. EFIS POWER switches – ON.
15. AP/TRIM POWER switch – ON.
16. Autopilot self-test – Monitor.
17. Engine instruments – Check.
BEFORE TAXIING
*1. CABIN signs – As required.
*2. BLEED AIR VALVES – As required.
*3. AFT BLOWER – As required.
*4. Avionics – Check and set.
*5. EFIS – TEST.
H
6. Flight controls/autopilot system – Check.
*7. FMS – Check and Set.
*8. Voice and flight data recorders – Check.
9. Radar – As required.
*10. Altimeters – Set and check.
11. FLAPS – Check.
