TM 1-1510-224-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
BEFORE TAKEOFF (CONT)
CAUTION
Do not use pitot heat for more than 15 minutes while
the aircraft is on the ground. Overheating may
damage the heating elements.
3.
ICE & RAIN switches - As required. As a
minimum, PITOT, STALL WARN, and
FUEL VENT switches shall be ON.
4.
Fuel panel - Check fuel quantity and
switch positions.
5.
Flight and engine instruments - Check for
normal indications and EFIS display
controllers are set to desired setting.
6.
CABIN CONTROLLER - Set.
7.
Annunciator
panels
-
Check
(not
indications).
8.
Flaps - As required.
9.
Trim - Set.
10.
ASE/ACS - Set.
11.
Avionics - Set.
12.
Flight controls - Check.
13.
Departure briefing - Complete.
LINE UP
1.
Engine anti-ice - As required.
2.
Engine AUTO IGNITION switches -
ARM.
3.
PROP levers - HIGH RPM.
2-56
