TM 1-1510-224-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
PRIOR TO MAINTENANCE TEST FLIGHT (CONT)
(3)
Waypoint string (line number, WPT
ID, and LAT/LONG coordinates) -
Enter into scratch pad.
(4)
Add/SEL (R1) - Depress to load
WPT into system.
(5)
Or load waypoint list using the data
transfer system by depressing NAV
DATA (L2) when the desired data
set
is
boxed
on
the
DATA
TRANSFER page.
(b)
Flight plan - Build as follows:
(1)
WPT
numbers
-
Enter
into
scratchpad in order of desired use
(up to nine) or box desired WPT’s
and PREV (R2) or NEXT (R3) and
depress LOAD SCRATCH PAD
(L5).
(2)
ROUTES (R5) - Depress.
(3)
Route - Select 1st, 2nd, or 3rd to
enter WPT numbers by depressing
the appropriate line button to store
the WPTs.
(4)
Routes to use as the active FPLN -
Select and depress the adjacent line
button to box it.
(5)
NEW FPLN (L1) - Depress to active
the FPLN.
(c)
TACAN list - Build as follows:
(1)
Mode switch B - Depress to select
FLIGHT PLAN page.
2-22
