TM 1-1510-224-CL
e.
Or load waypoint list using the data transfer system by
depressing NAV DATA (L2) when the desired data
set is boxed on the data transfer page.
2.
Flight plan - Build as follows:
a.
WPT numbers - Enter into scratchpad in order of
desired use (up to nine) or box desired WPT's and
PREV (R2) or NEXT (R3) and depress LOAD
SCRATCH PAD (L5).
b.
ROUTES (R5) - Depress.
c.
Route - Select 1st, 2nd, or 3rd to enter WPT
numbers by depressing the appropriate line button
to store the WPTs.
d.
Routes to use as the active FPLN - Select and
depress the adjacent line button to box it.
e.
NEW FPLN (L1) - Depress to activate the FPLN.
3.
TACAN list - Build as follows:
a.
Mode switch B - Depress to select FLIGHT PLAN
page.
b.
R5 line selection switch - Depress to select
TACAN LIST page.
c.
TACAN
station
information
(list
number,
ID,
channel number, latitude/longitude, and station
elevation) - Enter into scratchpad.
d.
R1 line selection switch - Depress to load into
system or load TACAN list using the DATA
TRANSFER SYSTEM by depressing NAV DATA
(L1) on the DATA TRANSFER page.
e.
TACAN stations to be used for updating - Select
and enter into scratchpad.
f.
R4 line selection switch - Depress to select
TACAN SELECT.
4.
Pattern steering mode - Program as follows:
a.
Mode switch B - Depress to select FLIGHT PLAN page.
b.
R5 line selection switch - Depress to select NAV
SETUP page.
c.
True bearing - Enter into scratchpad.
d.
L1 line selection switch - Depress to enter BEARING.
P-10