TM 1-1510-218-10   3C-61 Table 3C-15.  CDU Annunciations and Scratchpad Messages  (Continued) ANNUNCIATION / SP MESSAGE INITIATING CONDITION RESET MECHANISM LOCATION     BLINKING NOT CLEARABLE CDU MSG ALERT APPROACH (continued) 3.Following flashing approach annunciation  or  when Flight Mode transitions or manually   selected   to approach  mode.    HSI deviations   and   RAIM integrity    performance are set for approach. Ten seconds after initiation or HSI deviations change to terminal, en route, or oceanic mode. A B X APPROACH DEFINED Attempt to: 1.Enter a VNAV parameter at the MAP or visual runway extension waypoint. 2.Delete  the  V  attribute at    the    MAP    of    an approach or the RWXND waypoint of a visual approach. 3.Attach   a   Hold   to   an Initial     Approach     Fix (IAF) (with a data base  holding  pattern), MAP, or Missed Approach Holding Point  (MAHP)  (with  a data base holding pattern). 4.Attach a pattern to an IAF, (with a data base holding pattern), FAF/runway extension point,  MAP,  or  MAHP (with a data base holding pattern). 5.Insert  an  offset  when approach  waypoint  is the active waypoint 6.Enter a waypoint between the FAF/ runway extension point and MAP. 7.Perform a direct-to the MAP. Clear key. SP A