Insert the sampler hose nipple into the quick-release valve collar
(Figure 2.33): retract the valve collar and insert the nipple firmly into the
valve. Release the collar when the nipple is seated.
Figure 2.33 Inserting Sampler Hose Nipple into Sample Valve Collar
The Sampler Valve Hose Assembly must be properly grounded to avoid
possible fire or explosion from static electrical charges. An electrical
continuity test of the ground hook-up should be performed prior to
test to assure conductance of electrical charges from system to ground.
Attach ground wire: place one end of the ground wire on the
assembly and the other end on grounded metal (such as to an automobile
bumper). See Figure 2.10 for example of assembly placement.
2.5.6 Flushing the Inlet Hose
Follow the procedure outlined in Section 2.3.7 for flushing the inlet hose.
2 - 36